Manfrotto MVH502AH conversion 4 arca swiss kirk markins wimberley acratech

Description

Manfrotto MVH502AH Conversion by Hejnar Photo
PART MVH502AH with F63 clamp
Please note that not all items shown on the pictures may be included in the   auction, and they are for presentation purposes only.  To determine   items for sale please see reference in the section "
Auction Includes
".
Description:
New Hejnar Photo  conversion set for Manfrotto MVH502 Pro Video Head. This combination of plate and clamp will let you use Manfrotto  head with any arca swiss equipment. Manfrotto MVH502AH head represents an advance over the popular 501HDV, with sturdier construction and featuring Manfrotto's patented bridging technology. Manfrotto MVH502  use Manfrotto clamping system. Arca-swiss plate fans can now bypass this and use MVH502 with Arca type plates and L brackets. Arca type plate mounted on MVH 502  can disconnected from plate and use independent on other equipment if needed. Clamp can be positioned in relation to adapter plate in 90 degree increments to make it convenient for everybody. It is the best quick release system for tripods and monopods. International standard dove-tail  clamp, compatible with Arca-Swiss type quick release plates
Adapter plate is attached to Manfrotto  head with the same 4 screws as original top mouting plate
1) removing 4 screws located on in a corner with provided hex key.
2) Connect adapter plate to Manftotto head using original screws.
More detail instruction can be fund
here
Clamp Specification:
3.25  inch long
Socket is countersunk on top for 1/4-20 screw but also threaded 3⁄8”-16.
Two set of outside holes are taped 1/4-20 and 45mm or 30 mm apart from each other.
Clamp includes two safety stop relief grooves. This prevents free fall when the clamp is not fully closed and your plate has safety stops
Clamp knob is captive. Knob stops at maximum opening — cannot be lost in the field.
Clamp knob is made from one piece. No spacers or bushing between knob and clamp itself. No room for dust,  sand etc to enter inside.
Made from 6061-T6 Aluminum.
Black hard coat anodized clamp and clear anodized knob.
Made in USA
Auction Includes:
One adapter  plate.
One 3.25 inch clamp ( Model F63)
One 1/4-20 x 3/4 screws.
Two 10-32 screws
Hex key for ¼-20 screw  10-32 screw and plate screws
If you prefer different clamp model let me know and i will ship clamp you requested.